MC12FA201J-F

MC12FA201J-F

CORNELL DUBILIER ELECTRONICS (CDE)

云母和 PTFE 电容器
CAP MICA 200PF 5% 100V 1210
其他名称:338-1111 MC12FA201JF
CategoríadeproductoCapacitoresdemica
FabricanteCornellDubilier
SerieMC
EstilodeterminaciónSMD/SMT
Capacitancia200pF
Régimendevoltaje100V
Tolerancia5%
Coeficientedetemperatura25PPM/C
Rangodetemperaturadetrabajo-55Cto+125C
Longitud3.2mm
Ancho2.5mm
Altura2mm
EmpaquetadoBulk
MarcaCornellDubilier-CDE
Capacitancia(nF)0.2nF
FactordedisipaciónDF0.1
Temperaturadetrabajomáxima+125C
Temperaturadetrabajomínima-55C
Paquete/Cubierta1210(3225metric)
ProductoMicaHV&HighCurrentCapacitors
Cantidaddeempaquedefábrica100
Pesodelaunidad16mg
查看替代产品
相关商品
1Highlights Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren™t recommended because of cracking. The natural mica dielectric retains its high-Q to many megahertz, so higher frequency applications are limited by the circuit inductance, not the Type MC capacitor. Nonmagnetic Type MCN chips are available for MRI and other high frequency applications that often use more expensive porcelain ceramic chips. High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Speci˜cations Ł Extremely high Q at UHF/VHF frequencies Ł Free from thermal cracking, FR4 compatible Ł Wave solderable Ł Nonmagnetic option Ł Exceed 2 mm bend test Ł Better than porcelain Ł High RF current Š dV/dt 20,000 V/µs Ł Rock stable: No change with time, V & f Applications Ł MRI Coils and Generators Ł RF Instruments Ł Power Ampli˜ers Ł Tuned LCR Circuits Ł CATV Ł Ground and Flight Mobile Radio Ł LasersŁ Software - De˜ned Frequency-Hopping Radio CapCatalog CaseCapCatalog CaseCapCatalog Case(pF)Part NumberType (pF)Part NumberType (pF)Part NumberType 100 Vdc100 Vdc100 Vdc0.5MC08CA0R5D-F080568MC08FA680J-F 0805360MC12FA361J-F 12101.0MC08CA010D-F080575MC08FA750J-F 0805390MC12FA391J-F 12102.0MC08CA020D-F080582MC08FA820J-F 0805430MC12FA431J-F 12103.0MC08CA030D-F080591MC08FA910J-F 0805250MC18FA251J-F 18124.0MC08CA040D-F0805100MC08FA101J-F 0805270MC18FA271J-F 18125.0MC08CA050D-F080547MC12FA470J-F 1210300MC18FA301J-F 18126.0MC08CA060D-F080550MC12FA500J-F 1210330MC18FA331J-F 18127.0MC08CA070D-F080551MC12FA510J-F 1210360MC18FA361J-F 18128.0MC08CA080D-F080556MC12FA560J-F 1210390MC18FA391J-F 18129.0MC08CA090D-F080562MC12FA620J-F 1210430MC18FA431J-F 181210.0MC08CA100D-F080568MC12FA680J-F 1210470MC18FA471J-F 181212.0MC08EA120J-F080575MC12FA750J-F 1210500MC18FA501J-F 181215.0MC08EA150J-F080582MC12FA820J-F 1210510MC18FA511J-F 181218.0MC08EA180J-F080591MC12FA910J-F 1210560MC18FA561J-F 181220.0MC08EA200J-F0805100MC12FA101J-F 1210620MC18FA621J-F 181222.0MC08EA220J-F0805110 MC12FA111J-F 1210680MC18FA681J-F 181224.0MC08EA240J-F0805120MC12FA121J-F 1210750MC18FA751J-F 181227.0MC08EA270J-F0805130MC12FA131J-F 1210820MC18FA821J-F 181230.0MC08EA300J-F0805150MC12FA151J-F 1210910MC22FA911J-F 222033.0MC08FA330J-F 0805160MC12FA161J-F 12101000MC22FA102J-F 222036.0MC08FA360J-F 0805180MC12FA181J-F 12101100 MC22FA112J-F 222039.0MC08FA390J-F 0805200MC12FA201J-F 12101200MC22FA122J-F 222043.0MC08FA430J-F 0805220MC12FA221J-F 12101500MC22FA152J-F 222047.0MC08FA470J-F 0805240MC12FA241J-F 12101800MC22FA182J-F 222050.0MC08FA500J-F 0805250MC12FA251J-F 12102000MC22FA202J-F 222051.0MC08FA510J-F 0805270MC12FA271J-F 12102200MC22FA222J-F 222056.0MC08FA560J-F 0805300MC12FA301J-F 121062.0MC08FA620J-F 0805330MC12FA331J-F 1210Ratings Temperature Range Œ55 ºC to +125 ºC Rated Voltage Range 100 Vdc, 500 Vdc, and 1000 Vdc Capacitance Range 0.5 pF to 2,200 pF Capacitance Tolerance ±0.1pF to ±5% Case Sizes 0805, 1210, 1812, and 2220RoHS Compliant 2CapCatalog CaseCapCatalog CaseCapCatalog Case(pF)Part NumberType (pF)Part NumberType (pF)Part NumberType 500 Vdc500 Vdc500 Vdc0.5MC08CD0R5D-F080518MC12ED180J-F1210130MC18FD131J-F18121MC08CD010D-F080520MC12ED200J-F1210150MC18FD151J-F18122MC08CD020D-F080522MC12ED220J-F1210160MC18FD161J-F18123MC08CD030D-F080524MC12ED240J-F1210180MC18FD181J-F18124MC08CD040D-F080527MC12ED270J-F1210200MC18FD201J-F18125MC08CD050D-F080530MC12ED300J-F1210220MC18FD221J-F18126MC08CD060D-F080533MC12FD330J-F1210240MC18FD241J-F18127MC08CD070D-F080536MC12FD360J-F1210250MC18FD251J-F18128MC08CD080D-F080539MC12FD390J-F1210270MC18FD271J-F18129MC08CD090D-F080543MC12FD430J-F1210300MC18FD301J-F181210MC08CD100D-F080547MC12FD470J-F1210330MC18FD331J-F181212MC08ED120J-F080550MC12FD500J-F1210360MC18FD361J-F181215MC08ED150J-F080551MC12FD510J-F1210390MC18FD391J-F181218MC08ED180J-F080556MC12FD560J-F1210430MC18FD431J-F181220MC08ED200J-F080562MC12FD620J-F1210470MC18FD471J-F18121MC12CD010D-F121068MC12FD680J-F1210500MC22FD501J-F22202MC12CD020D-F121075MC12FD750J-F1210510MC22FD511J-F 22203MC12CD030D-F121082MC12FD820J-F1210560MC22FD561J-F22204MC12CD040D-F121091MC12FD910J-F1210620MC22FD621J-F22205MC12CD050D-F1210100MC12FD101J-F1210680MC22FD681J-F22206MC12CD060D-F1210110 MC12FD111J-F 1210750MC22FD751J-F22207MC12CD070D-F1210120MC12FD121J-F1210820MC22FD821J-F22208MC12CD080D-F1210130MC12FD131J-F1210910MC22FD911J-F 22209MC12CD090D-F1210150MC12FD151J-F12101000MC22FD102J-F222010MC12CD100D-F1210100MC18FD101J-F18121100 MC22FD112J-F 222012MC12ED120J-F1210110 MC18FD111J-F 18121200MC22FD122J-F222015MC12ED150J-F1210120MC18FD121J-F1812CapCatalog CaseCapCatalog CaseCapCatalog PartCase(pF)Part NumberType (pF)Part NumberType (pF)NumberType 1000 Vdc1000 Vdc1000 Vdc0.5MC12CF0R5D-F121039MC12FF390J-F1210250MC22FF251J-F22201.0MC12CF010D-F121043MC12FF430J-F1210270MC22FF271J-F22202.0MC12CF020D-F121047MC12FF470J-F1210300MC22FF301J-F22203.0MC12CF030D-F121050MC12FF500J-F1210330MC22FF331J-F22204.0MC12CF040D-F121051MC22FF510J-F2220360MC22FF361J-F22205.0MC12CF050D-F121056MC22FF560J-F2220390MC22FF391J-F22206.0MC12CF060D-F121062MC22FF620J-F2220430MC22FF431J-F22207.0MC12CF070D-F121068MC22FF680J-F2220470MC22FF471J-F22208.0MC12CF080D-F121075MC22FF750J-F2220500MC22FF501J-F22209.0MC12CF090D-F121082MC22FF820J-F2220510MC22FF511J-F 222010.0MC12CF100D-F121091MC22FF910J-F2220560MC22FF561J-F222012.0MC12EF120J-F1210100MC22FF101J-F2220620MC22FF621J-F222015.0MC12EF150J-F1210110 MC22FF111J-F 2220680MC22FF681J-F222018.0MC12EF180J-F1210120MC22FF121J-F2220750MC22FF751J-F222020.0MC12EF200J-F1210130MC22FF131J-F2220820MC22FF821J-F222022.0MC12EF220J-F1210150MC22FF151J-F2220910MC22FF911J-F 222024.0MC12EF240J-F1210160MC22FF161J-F22201000MC22FF102J-F222027.0MC12EF270J-F1210180MC22FF181J-F22201100 MC22FF112J-F 222030.0MC12EF300J-F1210200MC22FF201J-F22201200MC22FF122J-F222033.0MC12FF330J-F1210220MC22FF221J-F22201500MC22FF152J-F222036.0MC12FF360J-F1210240MC22FF241J-F22203Available Capacitance Values Case Sizes Standard Minimum Quanti -Capacitance (pF)MinimumCaseCap. Code100 Vdc500 Vdc1000 VdcStep, pF080.5 to 1000.5 to 20N/A0.51243.5 to 1000.5 to 100N/A0.512101 to 430101 to 150N/A1.0120.5 to 501.018241 to 82091.5 to 470N/A1.022821 to 1000471 to 1000N/A1.0221010 to 22001010 to 120050.5 to 150010.0INCHESMILLIMETERSCaseCaseLW H ILWHICodeType (Max.)Min./Max.(Max.)Min./Max.0808050.079 +.02 Œ00.049 +.02 Œ00.0550.008/0.0352.0 +0.5 Œ01.25 +0.5 Œ01.40.2/0.91212100.126 +.024Œ.0040.098 +.024Œ.0040.0790.012/0.0433.2 +0.6 Œ0.12.5 +0.6 Œ0.12.00.3/1.11818120.177 +.024 Œ.0080.126 +.024 Œ.00.0790.012/0.0514.5 +0.6 Œ0.23.2 +0.6 Œ02.00.3/1.32222200.224 +.016 Œ.0120.197 +.016 Œ.0120.0790.012/0.0515.7 +0.4 Œ0.35.0 +0.4 Œ0.32.0*0.3/1.3*.157 (4.0 mm) for 1000 V ratingPart Numbering System and Ordering Information *note - MC12, 100 volt units -250 pF and above, and 500 volt units -100 pF and above 2000 pc reels **note - MC22, 1000 volt units -680 pF and above 500 pc reels MC(N) 22FD122 J ŒT FCDECaseTemperature RoHSType CodeVoltage CapacitancePackage(MC only)MC = Standard08 = 0805A = 100 Vdc 010 = 1 pFBlank = BulkMCN complies(no F required)MCN = Nonmagnetic12 = 1210D = 500 Vdc1R8 = 1.8 pFT = Tape & reel 18 = 1812F = 1000 Vdc(187) = 187 pF22 = 2220182 = 1800 pFTCCodeCapacitanceRange (pF)Temperature CapacitanceDrift C0.5 to 10100 ±100±(0.5% +0.1 pF)E10.5 to 3050 ±50±(0.1% +0.1 pF)F30.5 & up25 ±25±(0.05% +0.1 pF)Order by complete part number, as below. For other options, write your requirement on your RFQ. Capacitor Tolerance Tol. Tolerance CapacitanceCodeRangeB±0.1 pF 0.5 pF to 5 pFC±0.25 pF 0.5 pF to 100 pFD±0.5 pF 0.5 pF to 10 pFD±0.50% 50.5 pF to 100 pFF±1 pF 5.5 pF to 10 pFF±1% 25.5 pF and upG±2% 13.0 pF and upJ±5% 10.5 pF and upReel Packed Case Codes 08 & 12: 3,000/reel* Case Codes 18 & 22: 1,000/reel**Bulk Packed 100 per bag4Typical Performance Curves Typical Mica Chip E.S.R.0.0010.010.1110100110100100010000Frequency (MHz)E.S.R. (Ohms)1pF/100V MC0810pF/100V MC08100pF/500V MC12470pF/500V MC18470pF/1000V MC221000pF/1000V MC2282906aType MC Typical ESR vs. Frequency Type MC Current at 60°C Rise0.00010.0010.010.1110100110100100010000Frequency (MHz)RMS Current (Amps)1pF/100V MC0810pF/100V MC08100pF/500V MC12470pF/500V MC18470pF/1000V MC221000pF/1000V MC22Type MC Maximum RMS Current vs. Frequency 5Typical Performance Curves Typical Mica Chip Q110100100010000110100100010000Frequency (MHz)Q1pF/100V MC0810pF/100V MC08100pF/500V MC12470pF/500V MC18470pF/1000V MC221000pF/1000V MC2282906bType MC Typical Q vs. Frequency Mica Chip Impedance0.11101001000100001000001000000110100100010000Frequency (MHz)Impedance (ohms)82906a1pF/100V MC0810pF/100V MC08100pF/500V MC12470pF/500V MC18470pF/1000V MC221000pF/1000V MC22Type MC Typical Impedance vs. Frequency 6MarkingCapacitance is within tolerance when measured as follows: 1Š1000 pF @ 1 MHz >1000 pF @ 1 kHzDissipation Factor is no more than 0.1% when measured as above at 5 Vrms or less. Example: R1 = 43 pFBaseCodeBaseCodeValue Ltr. Value Ltr. 10A40d11B43R12C45e13D47S15E50f16F51T18G56U20H60m22J62V24K68W25a70n27L75X30M80t33N82Y35b90y36P91Z39QMultiplierCodeNo. X 0.10 X 11 X 102 X 1003 X 0.019Voltage Code (color coded) 100 Vdc = Brown500 Vdc = Green1000 Vdc = Brown Surface/Green Sides1000 Vdc = Green [ MC12(0.5 - 50 pF)]Capacitance CodeTerminal Resin CoatingGlassSn PlatingNi Electrode: Type MC Cu Electrode: Nonmagnetic Type MCN Conductive ResinAg ElectrodeMicaHigh Q, Low ESR Construction for RF Power Applications 7Voltage Code (color coded) 100 Vdc = Brown500 Vdc = Green1000 Vdc = Brown Surface/Green Sides1000 Vdc = Green [ MC12(0.5 - 50 pF)]Quality Factor (Q) is as follows when measured at 1 MHz Insulation Resistance is no less than 100 G˚ when measured at rated voltage. *1000 Vdc rated is measured at 500 Vdc Withstanding voltage is two times the rated voltage between 5 seconds and without damage: with 50 mA or less current. Life Test: Subject capacitors to 125 ºC ±3 ºC with 1.5 times rated voltage applied for 2000 (+72, Œ0) hours. There will be no visual dam -age and the capacitors will meet the limits of the table below. Vibration Resistance: Subject the capacitors to simple harmonic mo -tion with an amplitude of 1.5 mm; vary the frequency uniformly from 10 to 55 Hz and return to 10 Hz, all in one minute. Repeat that cycle continuously for two hours in Temperature Coefficient and Drift: Measure the capacitors™ ca -pacitance at 25 ºC, Œ55 ºC, 25 ºC, 125 ºC and at 25 ºC Š all ±3 ºC Š after stabilizing at each temperature. The capacitor will meet the limits of the Characteristic table in Ordering Information. Heat Resistance: Subject the ca -pacitors to 125 ±2 ºC for 2 (+1,Œ0) hours. Then the insulation resis -tance will be no less than 5G˚. Solderability: Capacitor is im -mersed for 2 sec ±0.5, in a solder bath at 235 ºC ±5 ºC and covered with solder (Pb-Free), with 75% or more of the terminal portion. Solder Heat Resistance: Subject the capacitors to molten solder at 250±5 ºC for 5±0.5 seconds after 10 to 30 seconds pre-heating at 80 to 120 ºC. There will be no visual dam -age and the capacitors will meet the limits of the table below. After-Test Limits Test Withstand InsulationCapacitanceDFQVoltage Resistance(whichever >) Life Test ILILIV ±2% or ±.5 pF150% max IL2/3 x IL Vibration Resistance ILIV ±1% or ±1 pFILIL Bending Test ILIV ±.5% or ±1 pFIL Moisture Res.ILIV ±3% or ±.5 pF150% max IL2/3 x IL SolderabilityILILILILIL Heat Resistance Solder Heat Res.ILIV ±.5% or ±1 pFILILCapacitanceMin. QRange 1 to 80 pF500 to 3000>80 pF3000each of three mutually perpendicu -lar directions. There will be no vi -sual damage and the capacitors will meet the limits of the table below. Bending Test: Mount the capacitor as shown below and press 1.0 mm bending length, a crack and other abnormalities shall not be on the capacitor. Capacitors shall meet the limits of methods of JIS 5102/8.11Moisture Resistance: Subject the capacitors to 40 ±2 ºC at 90 to 95% humidity for 500 (+24, Œ0) hours. Return to room ambient for 24 hours. There will be no visual dam -age and the capacitors will meet the limits of the table below. 8 Hand Soldering MethodŁ SnAgCu recommended solderŁ Ł Ł 60 Watt iron or less SolderSolderTip of iron GoodBadCapacitor05010015020025030003050150 180200 Pre-HeatSolderingCoolingPeak: 230 ~ 260°C220 ~ 260°C10 sec. max.Time (sec) 05010015020025030002070220 ~ 255 °C5 sec.max.Peak: 230 ~ 255 °C8090Pre-HeatCoolingSolderingTime (sec) ItemSymbolCase Code08121822P1.157 ±.008 (4.0 ±0.2)B.069 ±.008 (1.75 ±0.2)Hole center to cavity centerC.138 ±.002 (3.5 ±0.05).217±.004 (5.5 ±0.1)D.315 ±.012 (8.0 ±0.3).472 ±.012 (12.0 ±0.3)d.059 (1.5 )P0.157 .004 (4.0 ±0.1).315 ±.008 (8.0 ±0.2)Hole center to cavity centerP2.079 ±.004 (2.0 ±0.1)L.110 (2.8 ) .150 (3.8 ).205 (5.2 ).246 (6.25 )W.075 ±.008 (1.9 ±0.2).118 ±.008 (3.0 ±0.2) .161 ±.008 (4.1 ±0.2).217 ±.008 (5.5 ±0.2)T.051 ±.004 (1.3 ±0.1).059 ±.004 (1.5 ±0.1).071 ±.004 (1.8 ±0.1) .087 ±.004 (2.2 ±0.1)t.012 ±.002 (0.3 ±0.05)Holder distanceW1.354 (9.0 ).512 (13.0 )W2about .47 (12)about .63 (16)9Surface-Mount Chip Mica Capacitors for Auto Insertion Carrier Dimensions ItemSymbolCase Code08121822P1.157 ±.008 (4.0 ±0.2)B.069 ±.008 (1.75 ±0.2)Hole center to cavity centerC.138 ±.002 (3.5 ±0.05).217±.004 (5.5 ±0.1)D.315 ±.012 (8.0 ±0.3).472 ±.012 (12.0 ±0.3)d.059 (1.5 )P0.157 .004 (4.0 ±0.1).315 ±.008 (8.0 ±0.2)Hole center to cavity centerP2.079 ±.004 (2.0 ±0.1)L.110 (2.8 ) .150 (3.8 ).205 (5.2 ).246 (6.25 )W.075 ±.008 (1.9 ±0.2).118 ±.008 (3.0 ±0.2) .161 ±.008 (4.1 ±0.2).217 ±.008 (5.5 ±0.2)T.051 ±.004 (1.3 ±0.1).059 ±.004 (1.5 ±0.1).071 ±.004 (1.8 ±0.1) .087 ±.004 (2.2 ±0.1)t.012 ±.002 (0.3 ±0.05)Holder distanceW1.354 (9.0 ).512 (13.0 )W2about .47 (12)about .63 (16)1/10/200810Notice and Disclaimer: All product drawings, descriptions, speci˜cations, statements, information and data (collectively, the fiInformationfl) in this datasheet or other publication are subject to change. The customer is responsible for checking, con˜rming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (fiCornell Dubilierfl) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter Œ and Cornell Dubilier speci˜cally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a speci˜c customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise speci˜ed by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
updated: 2021-08-05 15:59:25